The HO Luna Tram Track and Surfacing System

   

The Luna Tram Track and Surfacing System were developed for all applications of model railroading where the railway track or parts of it are imbedded in pavement like streetcar systems.  Industrial track connections very frequently have similar trackage.

The Luna system is based on an older Tillig track type which has been remodeled into the next generation.  The rails are installed on a sturdy plate and the various surface pieces are snapped in place.  This system was developed by Tillig for Luna.

The baseplate is equipped with holes so it can be screwed or nailed onto the layout.

The lower surface of the baseplate is equipped with power connections, which are prepared for the connection to commercial lugs.

                              .

Spacer pieces set the required distance between two track bases or alongside one track base.  The spacer pieces are also used to snap in place the surface elements:   just "tap and click"   and the track is assembled.

 

At completion the surface parts are only snapped in place.  Interesting surface combinations are possible, for example paving-blocks between the rails, grass between the tracks and pavement at the edges. Luna Tram does not set limits to the imagination!